Ackerman Computer Sciences
6233 East Sawgrass Road
Sarasota, Florida 34240-8922
Top / CFSound / Frequently Asked Questions / Can an output contact be used to operate a lamp to indicate that the message has been triggered ?
Can an output contact be used to operate a lamp to indicate that the message has been triggered ?
If you need individual lights that illuminate when the associated input is active, you would need the Contact I/O 8 module in the CFSound II. If you only need a single light that is illuminated whenever any sound is playing then you can use the PTT relay that is installed on the main unit and use a Contact Sense 8 or Contact Sense 24 module. You will have to 'decorate' the sound filenames with the 'S' attribute to trigger the output contacts.
|Why does the RED LED flash four times at power up ?|
|Why does the RED LED flash 2 times when attempting to play a sound ?|
|Why is the CFSOUND.INI file being ignored ?|
|How to record a sound longer than 60 seconds in Windows Sound Recorder|
|How can I play the next sound in a sequence for each contact closure ?|
Back to ACS Home Page
Powered by ACS Knowledgebase