CFSound III Kit S2 
This page give a brief description of how the CFSound III Kit S2 is wired.
CFSound III Kit S2



Kit Part # Description Switch(s) Motion
Sensor(s)
Speaker(s) CF Card
ACS-CF-CFSOUND-KITS2
Buy Online
This kit comes with:
  (1) CFSound III with 120VAC wall transformer(view)
  (2) 1.4" Dia Black Push Buttons(view)
  (2) 4" Dual cone indoor GM65 speaker with black grill(view)
  (1) 512 meg compact flash card with KITS123 sample files (view)
  (10) Feet of 22-4 gauge wire to the two push buttons(view)
  (2)(10) Feet of 16-2 gauge wire to two speakers(view)
2
 
2
Indoor
1


Indoor GM65 Speaker wiring
Strip one end of two 16 gauge 2 conductor wires back about two inches.
Install female 1/4" crimp on faston terminals on one end of both.
Connect female 1/4" fastons to speaker terminals. Red and Black polarity should be the same on both speakers.
CFSound III Kit M3 CFSound III Kit M3 CFSound III Kit M3

Connect other end of the two 16 gauge 2 conductor wires to the CFSound III.
Left Speaker:
 Red wire in CFSound III Main Connector pin #1.
 Black wire in CFSound III Main Connector pin #2.
Right Speaker:
 Red wire in CFSound III Main Connector pin #3.
 Black wire in CFSound III Main Connector pin #4.
CFSound III Kit M2


1.4" Push Button Wiring
Remove 10 - 12 inches of jacket from the 22 gauge 4 conductor wire, and strip each wire/lead back 1/4".
CFSound III Kit S3 CFSound III Kit M3

Crimp 1/4" red faston terminals on each wire.
CFSound III Kit S3

Push Button #1 - Connect the Black wire to the bottom 1/4" terminal, and the White wire to the middle 1/4" terminal.
Push Button #2 - Connect the Green wire to the bottom 1/4" terminal, and the Red wire to the middle 1/4" terminal.
CFSound III Kit S3

Remove 2 inches of jacket from the other end of the 22 gauge 4 conductor wire, and strip each wire/lead back 1/4".
CFSound III Kit S3

Connect the Black & Green wires along with the power supply ground wire to the CFSound III Main Connector in pin #10.
Connect the White wire to the CFSound III Main Connector in pin #5.
Connect the Red wire to the CFSound III Main Connector in pin #6.
CFSound III Kit S3



Return to CFSound III Page


Home
Ackerman Computer Sciences
6233 East Sawgrass Road
Sarasota, Florida 34240-8922
Phone (941)377-5775 -- Fax (941)378-4226

Copyright© 1992 - 2008 ACS, Sarasota, FL. All rights reserved. Windows TM is a trademark of the Microsoft Corporation. All other brand names or product names are or may be the trademarks or registered trademarks of their respective companies.


Last Updated 06/1/08